Download GT Bike V 0.5.0.4 – Screenshots and Description:

GT Bike V 0.1

GTBikeV is a mod for GTA V that turns a Smart Bike Trainer, or turbo trainer, into the game controller, making your game time actual training time.
You’ll have a cycling workout inmersed in the GTA V world environment.

The mod features a library that listens to the ANT+ wireless protocol signal from an ANT+ FE-C compatible trainer (Tacx, Wahoo, Elite, Bkool, Kinetic, Saris, etc…) reads the speed and applies it to the vehicle your character is riding during the game. It reads the incline of the terrain, the roughness (material) and the wind in the game and sends all that information to the smart trainer so it can reproduce the hardness of the terrain you are actually riding.
There is an option to record your training into a FIT file, accompanied with periodic screenshots, that you can later upload to Strava or your favorite training app to track your progress. The FIT file is complete with fake GPS location to make your virtual training more realistic.
The mod by default spans a road bicycle and dresses your character with biking clothes.

As you won’t be able to use your keyboard while riding the real bike, the mod features a course reader which auto drives you around Los Santos following
different routes of various difficulty levels. If auto drive is selected but no course is loaded, the character will roam freely around the map (be warned, that could lead you to some serious uphills). Auto driving uses the best driving skill level available in the game so you are not likely to hit anything, but you still can be ran over when driving in the freeways with heavy traffic. The mod will try to recover from that without needing you to use the keyboard.
If auto drive is not enabled, the vehicle can be controlled with the usual steering keys or with the alternate smooth steering keys that allow for finer control when riding the bike (but widens the turn radius as well)

Some settings can be controlled from an ini file, including the bike model spawn on start, the scale of the slopes (the game present unrealistic slopes way harder than the real life equivalents), and the real world GPS coordinates of 0,0 in Los Santos map that are used to map the location for the FIT file.

Warning: this mod requires actual PHYSICAL EXCERSISE to be meaningful.

Remember mods only work in Story Mode, not in GTA V online

Requirements:

Hardware:

Smart trainer ANT+ FE-C compatible
A bicycle compatible with your smart trainer
ANT+ dongle for your PC to communicate with the trainer

Software:

Most recent version of GTA V. This mod gets updated as soon as the updated Scripthook is available.
Alexander Blade’s ScripthookV ( http://gtaforums.com/topic/788343-script-hook-v/page-1 )
ScripHooktVDotnet V3.0.x ( https://github.com/crosire/scripthookvdotnet/releases )
My ANT+ FE-C communication DLL (included in the package)
Guad’s NativeUI V1.7 (included in the package)
Newtonsoft json encoder/decoder DLL (included in the package)

You may also need:

Microsoft .net framework 4.5.2 or above
Visual C++ Redistributable Packages for Visual Studio 2013

Installation instructions:

Copy ScripthookV.dll, ScriptHookVDotNet.dll and FE-C_Receiver_DLL.dll in the GTA V installation directory. If you don’t have a scripts directory, create one and place there GTBikeV.dll, NativeUI.dll and NewtonSoft.Json.dll along with the rest of the contents of the scripts folder contained in the ZIP file.
If you want the routes available you should copy the route files (.json) to the user data directory usually located at My Documents/Rockstar Games/GTA V/ModSettings
First time you execute the mod a new ini file will be created in that same directory.

Usage instructions:

Open the mod menu using F5 key.
Select the first option to activate the mod and initialize comunications with the trainer
Select the second option to toggle autodrive
Use the third option to select the desired route

The trainer must be switched on before activating the mod in order to be detected.

If you want to contribute with your own routes you can create them following the json scheme you’ll find in the included routes. Ping me on the comments to include them in future releases.

Acknowledgements:

Guad for NativeUI and all the forum posts about driving styles


Version 0.5.0.4
– Bluetooth support for power meters, cadence, speed and heart rate sensors and for Sterzo steering device.
– Improved simulation accuracy. Bikes perform differently and are suited for different terrains. Bike names changed.
– Bike city. Converts part or all the traffic into bicycles
– Screenshot of the activity summary
– Fixes normalized power and average speed calculation
– Fixes virtual speed aerodinamic drag parameters. Speed increased when using powermeter.
– Fixes drafting behind bikes
– Speed is always virtual now, even when using a trainer, to be able to apply all the simulation parameters.
– Bot support for courses. 4 different types, number and type configurable in the ini file.
– Leader board for bot position, w/kg, energy and distance
– Fixes installer when downloading new version of SHVDN
– Updates the INI file automatically with new entries for the current version

More:  Enhanced Restricted Areas 2.2

Version 0.4.2.1

– Tweaked Blacktrack responsiveness
– Fixed time tracking in HUD and FIT file
– Activity summary panel on ride saving including
power metrics, calories and TSS calculation
– Button for deleting the last activity if unwanted
– New design for course selector
– Unrouted course waypoints and configurable waypoint reach range
– Fixed prop location for props located far from the start point
– Key for choosing random destinations (Numpad2)
– Key for hiding the HUD (Numpad3)
– Configurable keys in the ini file

V 0.4.1.2
– Fixes a problem with Course library URL stored in the ini file. Requires to delete the line COURSELIBRARYURL in the GTBikeVConfig.ini file located in the ModSettings directory.

V 0.4.1.1
– New version of scripthookvdotnet (supported by installer)
– Fixes course selector button and profile not refreshing properly
– Fixes menu header positioning
– Protection against network failures when retrieving courses
– New device icons
– Support for legacy heart rate straps
– New menu auto open function and settings option
– Fixes crash on start moving in autodrive (Driver ability and agressiveness crash)
– Fixes crash on reload script after deactivating mod
– Fixes security configuration for HTTPS request of courses
– Setting for configuring request URL for courses
– Bike selector in menu
– User weight presented in correct units
– User FTP can be set in settings and is recalculated automatically

V 0.4.1.0
– Support for speed sensor
– Support for Tacx Blacktrack (experimental)
– Fixes screenshot interval
– Remotely downloaded course list and courses
– Removed local courses previously packaged with the mod
– New Course selection window with map and profile
– New Menu header showing device connection status
– Manual screenshots with NUMPAD_0
– Anonymous telemetry collection
– Fixed reverse starts in auto drive
– Fixed freezed mod after crash and unmount

V 0.4.0.4
– Adds support for running
– Adds support for Stride based speed sensors (footpods)
– Created Mod Installer supporting downloading of external
components.
– Installer includes a 100% completed save game
– Menu closes when speed is a bit over 0, not when it’s not 0
– Activity FIT file tweaked to avoid elevation correction in Strava
– Autodrive works now with manually set waypoints
– HUD redistribution to show Heart Rate permanently
– HUD changes to accomodate for pace information when running (instead of power)
– Choosing a course before mounting the bike works now
– Added FineSteeringValue to ini file to control the smooth steering.
Values between 0.3 and 1, defaults to 0.4.
– Setting for changing screenshot frequency added to ini file
– Setting for changing screenshot horizontal offset added to ini file

V 0.3.0.2
– Mayor overhaul of ANT library
– Implements ANT+ Power Sensor. Can be combined with FE-C
– Implements ANT+ Heart Rate sensor. Stores the information in the FIT file and relays the display with cadence
– Implements ANT+ Cadence Sensor. If present, cadence from the cadence sensor is preferred, then power sensor cadence and finally trainer cadence
– Implements ANT+ Road feel for Tacx Neo trainers. Can be disabled in the ini file
– Virtual speed kicks in when using only a power meter, but can be activated for Trainers too from the ini file
– Braking is possible with the braking key (brakes the trainer if one connected)
– Fixes courses (thanks @defiancecp)
– Adds 2 more courses
– Fixes support for trainers using extended ANT ids
– Creates ModSettings directory if not present to avoid errors
– Smooth steering with keys Numpad 4 and Numpad 6
– Radio support while cycling (key Numpad7 to activate and skip stations )
– Error message added when a course is malformed or missing
– Invincibility mode only active when the mod is active not when it is loaded
– Incline is calculated in front of the bike instead of below the bike to anticipate and allow trainer time to adjust
– Numpad1 toggles autosteering without needing to get into the menu
– No more flying when going into the water
– Implemented drafting performance in the HUD (green leds)
– New menu option to disable obstacle avoidance in auto drive
– Waypoints color and size can be configured globally from the settings file and individually from the course file
– Includes a txt with help on the ini file settings

More:  Hoodies for franklin (pack) [Gucci / Supreme / Louis Vuitton] 1.0 (replace)

It is recommended to delete the contents of Scripts directory before installing as the FE-C library has been renamed

V 0.2.3
Fixed sudden slope bumps when entering tunnels or riding under bridges
Fixed typo in GPS coordinates in the INI file
Added menu option to configure user weight (for fine tune edit the INI file directly)
Added menu option for saving the current activity at any time, starting a new one

V 0.2.2
Garmin has politely asked to remove any resemblance to their product line from the mod, so the bike computer skin has been changed
Implemented imperial units in the bike computer. Can be set up in the ini file

V 0.2.1
Fix for incorrect outfits in Franklin and Trevor
Menu options disabled until mod is enabled
Mod disabling / re-enabling
Fix for trainers which don’t report cadence
Fix for locale dependent ini file reading
ANT id can be set in the ini file if you have more than one trainer


Version 0.5.0.4
– Bluetooth support for power meters, cadence, speed and heart rate sensors and for Sterzo steering device.
– Improved simulation accuracy. Bikes perform differently and are suited for different terrains. Bike names changed.
– Bike city. Converts part or all the traffic into bicycles
– Screenshot of the activity summary
– Fixes normalized power and average speed calculation
– Fixes virtual speed aerodinamic drag parameters. Speed increased when using powermeter.
– Fixes drafting behind bikes
– Speed is always virtual now, even when using a trainer, to be able to apply all the simulation parameters.
– Bot support for courses. 4 different types, number and type configurable in the ini file.
– Leader board for bot position, w/kg, energy and distance
– Fixes installer when downloading new version of SHVDN
– Updates the INI file automatically with new entries for the current version

Version 0.4.2.1

– Tweaked Blacktrack responsiveness
– Fixed time tracking in HUD and FIT file
– Activity summary panel on ride saving including
power metrics, calories and TSS calculation
– Button for deleting the last activity if unwanted
– New design for course selector
– Unrouted course waypoints and configurable waypoint reach range
– Fixed prop location for props located far from the start point
– Key for choosing random destinations (Numpad2)
– Key for hiding the HUD (Numpad3)
– Configurable keys in the ini file

V 0.4.1.2
– Fixes a problem with Course library URL stored in the ini file. Requires to delete the line COURSELIBRARYURL in the GTBikeVConfig.ini file located in the ModSettings directory.

V 0.4.1.1
– New version of scripthookvdotnet (supported by installer)
– Fixes course selector button and profile not refreshing properly
– Fixes menu header positioning
– Protection against network failures when retrieving courses
– New device icons
– Support for legacy heart rate straps
– New menu auto open function and settings option
– Fixes crash on start moving in autodrive (Driver ability and agressiveness crash)
– Fixes crash on reload script after deactivating mod
– Fixes security configuration for HTTPS request of courses
– Setting for configuring request URL for courses
– Bike selector in menu
– User weight presented in correct units
– User FTP can be set in settings and is recalculated automatically

V 0.4.1.0
– Support for speed sensor
– Support for Tacx Blacktrack (experimental)
– Fixes screenshot interval
– Remotely downloaded course list and courses
– Removed local courses previously packaged with the mod
– New Course selection window with map and profile
– New Menu header showing device connection status
– Manual screenshots with NUMPAD_0
– Anonymous telemetry collection
– Fixed reverse starts in auto drive
– Fixed freezed mod after crash and unmount

More:  Paleto Bay Cliff Accident [Menyoo] 1.0

V 0.4.0.4
– Adds support for running
– Adds support for Stride based speed sensors (footpods)
– Created Mod Installer supporting downloading of external
components.
– Installer includes a 100% completed save game
– Menu closes when speed is a bit over 0, not when it’s not 0
– Activity FIT file tweaked to avoid elevation correction in Strava
– Autodrive works now with manually set waypoints
– HUD redistribution to show Heart Rate permanently
– HUD changes to accomodate for pace information when running (instead of power)
– Choosing a course before mounting the bike works now
– Added FineSteeringValue to ini file to control the smooth steering.
Values between 0.3 and 1, defaults to 0.4.
– Setting for changing screenshot frequency added to ini file
– Setting for changing screenshot horizontal offset added to ini file

V 0.3.0.2
– Mayor overhaul of ANT library
– Implements ANT+ Power Sensor. Can be combined with FE-C
– Implements ANT+ Heart Rate sensor. Stores the information in the FIT file and relays the display with cadence
– Implements ANT+ Cadence Sensor. If present, cadence from the cadence sensor is preferred, then power sensor cadence and finally trainer cadence
– Implements ANT+ Road feel for Tacx Neo trainers. Can be disabled in the ini file
– Virtual speed kicks in when using only a power meter, but can be activated for Trainers too from the ini file
– Braking is possible with the braking key (brakes the trainer if one connected)
– Fixes courses (thanks @defiancecp)
– Adds 2 more courses
– Fixes support for trainers using extended ANT ids
– Creates ModSettings directory if not present to avoid errors
– Smooth steering with keys Numpad 4 and Numpad 6
– Radio support while cycling (key Numpad7 to activate and skip stations )
– Error message added when a course is malformed or missing
– Invincibility mode only active when the mod is active not when it is loaded
– Incline is calculated in front of the bike instead of below the bike to anticipate and allow trainer time to adjust
– Numpad1 toggles autosteering without needing to get into the menu
– No more flying when going into the water
– Implemented drafting performance in the HUD (green leds)
– New menu option to disable obstacle avoidance in auto drive
– Waypoints color and size can be configured globally from the settings file and individually from the course file
– Includes a txt with help on the ini file settings

It is recommended to delete the contents of Scripts directory before installing as the FE-C library has been renamed

V 0.2.3
Fixed sudden slope bumps when entering tunnels or riding under bridges
Fixed typo in GPS coordinates in the INI file
Added menu option to configure user weight (for fine tune edit the INI file directly)
Added menu option for saving the current activity at any time, starting a new one

V 0.2.2
Garmin has politely asked to remove any resemblance to their product line from the mod, so the bike computer skin has been changed
Implemented imperial units in the bike computer. Can be set up in the ini file

V 0.2.1
Fix for incorrect outfits in Franklin and Trevor
Menu options disabled until mod is enabled
Mod disabling / re-enabling
Fix for trainers which don’t report cadence
Fix for locale dependent ini file reading
ANT id can be set in the ini file if you have more than one trainer

Credits:

Makinolo

Download mod

File File size

zipGTBikeV_0_5_0_4

2 MB